Filter
Top Products
168
Reference Manual
IP2048/RM, Rev AA
Appendix F: Configuring Using HART
February 2015
Mobrey MCU900 Series control unit
To view the number of preamble bytes:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select SYSTEM, FIXED, HART, and then Num Req Preams.
4. When finished, press the ESC key to exit to the previous menu.
F.4.25 Transmitter flags (D965)
These flags (8 digits) are used by the HART protocol.
Field Communicator
This parameter is not available in the MSP Series DD (Device Descriptor) file.
Mobrey MCU900 Series control unit
To view the flags:
1. From the Main Menu screen, select SETUP.
2. Select the transmitter (e.g. “Tx1:MSP400RH”).
3. Select SYSTEM, FIXED, HART, and then Flags.
4. When finished, press the ESC key to exit to the previous menu.
Fast Keys
–
Num Req Preams D964
5
(Mobrey MCU901 Screen)
Flags D965
00000000
(Mobrey MCU901 Screen)