Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
5-28
Restart the Transmitter
13. Restart the transmitter
When the transmitter is configured, it should be restarted to make sure that all
configuration changes are properly activated and the transmitter performs as
expected. It may take up to 60 seconds after the restart button is pressed until
measurement values are updated.
View Measured Values
14. Step three in the Guided Setup lets you view measurement values in order
to verify that the transmitter works correctly. If the measured values seem
incorrect, configuration settings may need to be adjusted.
Backup
15. When configuration is finished, it is recommended that the configuration is
saved to a backup file.