Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
5-20
Device Properties
3. Check the device properties
The first window in the configuration wizard presents general information
stored in the transmitter database such as device model, serial number,
probe type, probe length, communication protocol and device address.
Check that the information complies with the ordering information.
General Information
4. Enter Device Information
HART command: [2, 2, 1].
This window lets the user enter Tag, Message, Descriptor, and Date. The
information is not required for the operation of the transmitter and can be
left out if desired.