Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
5-31
Rosemount 5300 Series
BASIC CONFIGURATION
USING DELTAV
The Rosemount 5300 Series supports DD Methods for DeltaV to facilitate
transmitter configuration. The following description shows how to use DeltaV
with the AMS application to configure the Rosemount 5300 Series. The
corresponding F
OUNDATION Fieldbus commands are also shown.
To configure the Rosemount 5300 with DeltaV:
1. Select DeltaV>Engineering>DeltaV Explorer from the Start menu.
2. Navigate through the file structure to find the 5300 transmitter
3. Click the right mouse button on the 5300 transmitter icon and choose
Properties.
4. The Fieldbus Device Properties window lets you enter Device Tag and
Description. This information is not required for the operation of the
transmitter and can be left out if desired.
General information such as device type (5300), manufacturer, device ID are
presented. The Rosemount 5300 Series device ID consists of the following
components:
Manufacturer ID-Model-Serial Number.
Example: 0011515300 Radar T2-0x81413425.
Check that the information complies with the ordering information.
5. Select the desired transmitter in the DeltaV Explorer and choose the
Configure option.