Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
www.rosemount.com
Appendix C Advanced Configuration
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-1
User Defined Upper Reference Point . . . . . . . . . . . . . . . . page C-3
Handling of Disturbances from Nozzle . . . . . . . . . . . . . . . page C-4
Threshold Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-8
Probe End Projection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-10
Echo Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-12
Dielectric Constant Settings . . . . . . . . . . . . . . . . . . . . . . . page C-14
Dynamic Vapor Compensation . . . . . . . . . . . . . . . . . . . . . page C-15
Signal Quality Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-20
SAFETY MESSAGES Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operations. Information that
raises potential safety issues is indicated by a warning symbol ( ). Please
refer to the following safety messages before performing an operation
preceded by this symbol.
Explosions could result in death or serious injury:
Verify that the operating environment of the transmitter is consistent with the appropriate
hazardous locations certifications.
Before connecting a HART-based communicator in an explosive atmosphere, make
sure the instruments in the loop are installed in accordance with intrinsically safe or
non-incendive field wiring practices.
Do not remove the transmitter cover in explosive atmospheres when the circuit is alive.