Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
A-31
Rosemount 5300 Series
Code Hazardous Locations Certifications (continued)
IF CSA FISCO Intrinsic Safety
(2)
I7 IECEx Intrinsic Safety
IG IECEx FISCO Intrinsic Safety
(2)
KA ATEX, FM, CSA Flameproof/Explosion-proof
(3)
KB ATEX, FM, IECEx Flameproof/Explosion-proof
(3)
KC ATEX, CSA, IECEx Flameproof/Explosion-proof
(3)
KD FM, CSA, IECEx Flameproof/Explosion-proof
(3)
KE ATEX, FM, CSA Intrinsic Safety
KF ATEX, FM, IECEx Intrinsic Safety
KG ATEX, CSA, IECEx Intrinsic Safety
KH FM, CSA, IECEx Intrinsic Safety
KI FISCO - ATEX, FM, CSA Intrinsic Safety
(2)
KJ FISCO - ATEX, FM, IECEX Intrinsic Safety
(2)
KK FISCO - ATEX, CSA, IECEX Intrinsic Safety
(2)
KL FISCO - FM, CSA, IECEX Intrinsic Safety
(2)
Code Options
M1 Integral digital display
T1 Transient Protection Terminal Block (standard with FISCO options)
Remote Housing Mounting
B1 1 m / 3.2 ft. Remote Housing Mounting Cable and Bracket
B2 2 m / 6.5 ft. Remote Housing Mounting Cable and Bracket
B3 3 m / 9.8 ft. Remote Housing Mounting Cable and Bracket
Special Configuration (Software)
C1 Factory configuration (CDS required with order)
C4 Namur alarm and saturation levels, high alarm
C5 Namur alarm and saturation levels, low alarm
C8 Low alarm
(4)
(standard Rosemount alarm and saturation levels)
Special Certifications
Q4 Calibration Data Certification
QG GOST Primary Verification Certificate
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H).
PlantWeb Diagnostic Functionality
D01 FOUNDATION fieldbus Diagnostics Suite
DA1 HART Diagnostics Suite
(1) Not available with Flame/Explosionproof approvals (E1, E3, E5, E6, E7, KA, KB, KC, and KD)
(2) Requires Foundation Fieldbus signal output.
(3) Probes are intrinsically safe.
(4) The standard alarm setting is high.