Filter
Top Products
Reference Manual
00809-0100-4530, Rev BA
July 2009
Rosemount 5300 Series
A-24
Code Hazardous Locations Certifications
NA No Hazardous Locations Certifications
E1 ATEX Flameproof
(16)
E3 NEPSI Flameproof
(16)
E5 FM Explosion-proof
(16)
E6 CSA Explosion-proof
(16)
E7 IECEx Flameproof
(16)
I1 ATEX Intrinsic Safety
IA ATEX FISCO Intrinsic Safety
(17)
I3 NEPSI Intrinsic Safety
IC NEPSI FISCO Intrinsic Safety
(17)
I5 FM Intrinsic Safety and Non-Incendive
IE FM FISCO Intrinsic Safety
(17)
I6 CSA Intrinsic Safety
IF CSA FISCO Intrinsic Safety
(17)
I7 IECEx Intrinsic Safety
IG IECEx FISCO Intrinsic Safety
(17)
KA ATEX, FM, CSA Flameproof/Explosion-proof
(16)
KB ATEX, FM, IECEx Flameproof/Explosion-proof
(16)
KC ATEX, CSA, IECEx Flameproof/Explosion-proof
(16)
KD FM, CSA, IECEx Flameproof/Explosion-proof
(16)
KE ATEX, FM, CSA Intrinsic Safety
KF ATEX, FM, IECEx Intrinsic Safety
KG ATEX, CSA, IECEx Intrinsic Safety
KH FM, CSA, IECEx Intrinsic Safety
KI FISCO - ATEX, FM, CSA Intrinsic Safety
(17)
KJ FISCO - ATEX, FM, IECEx Intrinsic Safety
(17)
KK FISCO - ATEX, CSA, IECEx Intrinsic Safety
(17)
KL FISCO - FM, CSA, IECEx Intrinsic Safety
(17)
Code Options
M1 Integral digital display
P1 Hydrostatic testing
(18)
N2 NACE material recommendation per MR-0175 and MR-0103
(19)
LS Long stud
(20)
9.8 in (250 mm) for flexible single lead probe to prevent contact with wall/nozzle.
Standard height is 3.9 in (100 mm) for probes 5A and 5B
W2 Short weight for flexible single lead probe
(21)
BR Mounting Bracket for 1.5 in. NPT Process Connection (RA)
T1 Transient Protection Terminal Block (standard with FISCO options)
U1 WHG Overfill Approval (pending, consult factory)
Special Configuration (Software)
C1 Factory configuration (CDS required with order)
C4 Namur alarm and saturation levels, high alarm
C5 Namur alarm and saturation levels, low alarm
C8 Low alarm
(22)
(standard Rosemount alarm and saturation levels)
Qx - Special Certifications
Q4 Calibration Data Certification
Q8 Material Traceability Certification per EN 10204 3.1
(23)
QG GOST Primary Verification Certificate
QS Prior-use certificate of FMEDA Data. Only available with HART 4-20 mA output (output code H).