Filter
Top Products
5-47
Constant Control mode settingChang
es dur-
ing op-
eration
Default
setting
Setting
range
Setting
unit
Regis-
ter No.
NameConstant
Flux
vector
Open
loop
vector
V/f with
PG
V/f
control
Chang
es dur-
ing op-
eration
Default
setting
Setting
range
Setting
unit
Regis-
ter No.
Name
F9-03 Communications
external fault input
operation selection
039B 1 0 to 3 1 No Yes Yes Yes Yes
F9-04 Not used. 039C 1 --- 0 --- --- --- --- ---
F9-05 Not used. 039E 1 --- 1 --- --- --- --- ---
F9-06 CompoBus/D
operation selection
039F 1 0 to 3 1 No Yes Yes Yes Yes
Note When the control mode is changed, the Inverter will revert to default settings. (The flux vector
control default settings will be displayed.)
D External Terminal Function (H) Parameter Constants
Constant Name Regis- Setting Setting Default Chang
Control mode setting
ter No. unit range setting es dur-
ing op-
eration
V/f
control
V/f with
PG
Open
loop
vector
Flux
vector
H1-01 Multi-function input 1:
Terminal 3 selection
0400
Hex 0 to 77
24 No Yes Yes Yes Yes
H1-02 Multi-function input 2:
Terminal 4 selection
0401 14 No Yes Yes Yes Yes
H1-03 Multi-function input 3:
Terminal 5 selection
0402 3 (0)
(See
note.)
No Yes Yes Yes Yes
H1-04 Multi-function input 4:
Terminal 6 selection
0403 4 (3)
(See
note.)
No Yes Yes Yes Yes
H1-05 Multi-function input 5:
Terminal 7 selection
0404 6 (4)
(See
note.)
No Yes Yes Yes Yes
H1-06 Multi-function input 6:
Terminal 8 selection
0405 8 (6)
(See
note.)
No Yes Yes Yes Yes
H2-01 Multi-function contact
output: terminal 9 to
10.
0406
Hex 0 to 37
0 No Yes Yes Yes Yes
H2-02 Multi-function output
1: terminal 25.
0407 1 No Yes Yes Yes Yes
H2-03 Multi-function output
2: terminal 26.
0408 2 No Yes Yes Yes Yes
H3-01 Signal selection:
terminal 13 (Voltage)
0409 1 0, 1 0 No Yes Yes Yes Yes
H3-02 Gain: terminal 13 040A 0.1 0.0 to
1,000.0
100.0 Yes Yes Yes Yes Yes
H3-03 Bias: terminal 13 040B 0.1 –100.0 to
+100.0
0.0 Yes Yes Yes Yes Yes
H3-04 Multi-function analog
input signal selection:
terminal 16
040C 1 0, 1 0 No Yes Yes Yes Yes
H3-05 Selection: Terminal 16 040D Hex 0 to 1F 1F No Yes Yes Yes Yes
H3-06 Gain: terminal 16 040E 0.1 0.0 to
1,000.0
100.0 Yes Yes Yes Yes Yes
H3-07 Bias: terminal 16 040F 0.1 –100.0 to
+100.0
0.0 Yes Yes Yes Yes Yes
H3-08 Signal selection:
terminal 14
0410 1 0 to 2 2 No Yes Yes Yes Yes
H3-09 Selection: Terminal 14 0411 Hex 1 to 1F 1F No Yes Yes Yes Yes
CompoBus/D Communications Card Operations Chapter 5