Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Features
Page 4-15Telephone and Extension Features
4
Planning Form Instructions 4
1. After assigning Individual Coverage for each receiver telephone, locate the
appropriate form for each sender telephone (Form 4b, 4d, 4f, 5a, or 5b)
2. Under the Primary Cover Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 2 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1–6) in the space provided.
3. Under the Secondary Cover Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 2 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1–6) in the space provided.
4. After assigning senders to Group Coverage on form 7c, locate the
appropriate form for each sender telephone (Form 4b, 4d, 4f, 5a, or 5b).
5. Under the Group Coverage Ring Delay heading, do one of the following:
■ To keep the factory-set delay, check the 3 rings box.
■ To change the factory-set delay, check the second box and write the
number of rings (1–9) in the space provided.