Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Before You Begin
Page 1-8Requirements for Supporting CTI Applications
1
For this configuration you must have the following equipment and software:
■ An Intel i386, Intel i486, or Pentium Class computer with at least
16 megabytes of RAM. Additional memory may be needed if additional
applications will be running on the server machine. Refer to the MERLIN
LEGEND
Network Manager’s Guide
form more information.
■ One of the following configurations:
— Novell NetWare
®
Version 3.12, 4.1 or 4.11
■ MERLIN LEGEND PassageWay Driver Version 1.1 or later
installed
■ Telephony Services for NetWare software, Release 2.2.1 or
later installed
■ An Eicon SCOM ISDN BRI card for the CTI link
■ A free 8- or 16-bit ISA slot for the ISDN BRI card
■ 5 megabytes of disk space on the SYS (system) volume
■ Either Interrupt 2 or Interrupt 3 available
— Microsoft Windows NT
®
4.0 Server or Windows NT 4.0 Workstation
■ MERLIN LEGEND NT PBX Driver Version 1.0 or later
installed
■ CentreVu
®
Computer-Telephony Release 3.1 or later
installed
■ An Eicon DIVA Version 2.0 ISDN BRI card for the CTI link
■ 5 megabytes of disk space available
■ A free 16-bit ISA slot for the ISDN BRI card
■ System software Release 5.0 or later installed on the MERLIN LEGEND
Communications System
■ The MERLIN LEGEND Communications System configured in Hybrid/PBX
mode
■ An MLX port board (using firmware version 28 or later,
except
Version 29)
installed in the MERLIN LEGEND Communications System
NOTE:
If you have Version 29, replace the board with an appropriate
version, or for a replacement card, call the TSO at: 1 800 628-2888.
■ If the MERLIN LEGEND Communications System has only one MLX port
board, you will also need System Programming and Maintenance (SPM)
software, Version 5.15 or later to program your CTI link.
■ One port on an MLX port board is used for the link. Select from ports 2, 3,
4, 6, 7, or 8 . The CTI link port cannot be the potential operator port or the
console programming port.