Lucent Technologies 6.1 Marine Radio User Manual


 
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Index
Page IN-9
Lines/trunks
adding to the system
, 6–4
assigning, 3–50
capacity, 2–2
connecting components with, 2–4
Direct Inward Dial (DID), 3–42
DS1 connectivity, 3–23
hold disconnect interval, 3–14
identifying jacks, 3–1
incoming types, 3–6
jacks, 3–2
labels, 3–7
loop-start disconnect, 3–12
modules and jack types, 3–2
NI-1 BRI connectivity, 3–44
options, 3–11
outmode signaling, 3–13
planning overview, 3–1
pools, 3–16
Primary Rate Interface (PRI), 3–23
QCC operator to receive calls, 3–15
QCC queue priority, 3–15
remote access, 3–18
required, 6–2
T1 service, 3–23, 3–24
T1 Switched 56 service, 3–28
tie, 3–39
toll type, 3–13
Voice Messaging System, 3–10
Local Area Networks (LANs)
host computer data stations
, 5–15, 5–25
workstation data stations, 5–15, 5–25
Logical IDs, 2–4
Loop-Start
disconnect signal, 3–12
lines/trunks, 5–27
reliable disconnect, 3–12
trunk-to-trunk transfer, 3–12
Loudspeaker paging jacks, 3–9
LS-ID Delay, 3–4
M
Magic on Hold, 3–9
Maintenance Alarm jacks, 3–9
Marked System Speed Dial, 4–58
Marked system speed dial
and star codes
, 2–12, 4–58
Master extensions, 4–14
MCI 800 services, D–1
MCI 900 services, D–1
MCI Prism services, D–1
MCI Toll services, 3–34
MCI VNet services, D–1
Megacom 800 services, 3–3, 3–24, D–1
Megacom WATS services, 3–3, D–1