Filter
Top Products
MERLIN LEGEND
®
Communications System Release 6.1
SMDR Options
Call Report Format
❑ Basic ✦
❑ ISDN
Calls Reported (non-UDP)
❑ Incoming and outgoing ✦
❑ Outgoing only
Talk Time
❑ Enabled
❑ Disabled ✦
Inside Dial Tone
❑ Inside ✦
❑ Outside
Reminder Service Cancel
❑ No
❑ Yes, _____ time of day
Calls to Unassigned Extensions
❑ QCC Queue _________
§
❑ Extension ✦, No. __________ (default is the
primary operator extension)
❑ Calling Group, Extension No. __________
Recall Timer
❑ 350 ms
❑ 450 ms ✦
❑ 650 ms
❑ 1 sec
Rotary
❑ Delay ✦
❑ No Delay
Form 8a-1
System Features
Transfer Options**
Return Time Interval
†
❑ 4 rings ✦
❑ 0 rings
❑ _____ rings (1–9)
One-Touch Call Handling
❑ One-Touch Transfer ✦
❑ Manual Completion
❑ Automatic Completion ✦
❑ One-Touch-Hold
Transfer Audible
❑ Music On Hold ✦
❑ Ringback
Type of Transfer
❑ Voice button
❑ Ring button ✦
Camp-On Return Time
❑ 90 seconds ✦
❑ _____ seconds (30–300)
Call Park Return Time
❑ 180 seconds ✦
❑ _____ seconds (30–300)
Automatic Callback Interval
❑ 3 rings ✦
❑ _____ rings (1–6)
Extension Status
❑ Hotel
❑ Assign to operator positions
______ ______ ______ ______
______ ______ ______ ______
❑ Group Calling/CMS ✦
Form 8a
Note: If you use equipment that rebroadcasts music or other copyrighted material, you may be required to obtain a copyright
license from, and pay license fees to, a third party such as the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI). Or you can purchase a Magic-on-Hold system, which does not
require you to obtain such a license, from Lucent Technologies or an authorized representative.
✦
Factory Setting
*
Beginning with Release 2.1; calls received on personal lines with Do Not Disturb on will go immediately to Coverage instead
of waiting for the Cover Delay Interval.
†
If the system has AUDIX Voice Power/FAX Attendant System, Integrated Administration will automatically set the Return Time
Interval to “6.”
‡
For systems where the majority of lines are PRI, the SMDR Call Length should be one second.
** Transfer features (and any feature that requires more than one SA button) can be disabled on single-line telephones by
removing all but one SA button via Centralized Programming.
§
Hybrid/PBX mode only
Call Length
‡
❑ 40 seconds ✦
❑ _____ seconds (0–255)
Calls Reported (UDP)
❑ Incoming and outgoing ✦
❑ None