Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
T1/PRI Planner
Page D-2
D
Form Needed D
T1/PRI Planner
Planning Form Instructions D
1. On page 1, fill in the customer name, telephone number, and address.
NOTE:
Reference Number is filled in by SDSC.
2. Fill in the Order Number.
3. Identify the personnel handling the account:
a. Account Executive’s name and telephone number.
b. System Consultant’s name and telephone number.
4. Identify the DS1 facility vendor by writing the vendor’s name under the
T1/PRI Vendor heading, along with the contact person’s name and
telephone number.
5. Under the Installation heading:
a. Write the “Due Date” on which the installation is scheduled to be
complete.
b. Write the date the equipment is scheduled for delivery to the
customer in the Materials-on-Job Date space.
6. Under the Installation Contacts heading, list the names and telephone
numbers of the personnel responsible for the equipment order and its
installation:
a. (Order) Implementor
b. SDSC Manager
c. National Technical Service Center (NTSC) Engineer
d. Data Services Organization (DSO) Manager
7. Under the question about whether the order has been placed:
■ If the order has been placed, check the Yes box and fill in the date.
■ If the order has not been placed, check the No box.
8. On page 2, complete one box for each 100D module by transferring the
options information for each module from the corresponding box on
Form 3b (page 1):
a. Service Ordered or Planned (Type of Service)
b. Frame Format
c. Switch Type
d. Line Coding (Suppression)
e. Line Signaling Mode
f. Synchronization Timing (Clock Synchronization: Source)