Lucent Technologies 6.1 Marine Radio User Manual


 
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Features
Page 4-54System Features
4
Night Service 4
Use these instructions only if Night Service is used for after-hours telephone
operation. Otherwise, skip to the next section, “Labeling.” This section contains
instructions for selecting any combination of the following options for Night
Service:
Night Service with Group Assignment
Night Service with Outward Restriction
Night Service with Time Set
Night Service with Group Assignment 4
This section contains instructions for setting Night Service so that any call that
comes to the operator console while Night Service is in effect rings immediately at
each available telephone in a defined group and/or at a designated calling group.
Calls ring immediately even on lines/trunks set for Delay Ring or No Ring.
You can create up to eight Night Service groups and/or Night Service calling
groups, one for each operator. There is no limit to the number of telephones or
outside lines assigned to each Night Service group, and each telephone or
outside line can be assigned to more than one Night Service group.
A calling group can be the Night Service group for more than one operator, but
only one calling group is allowed for each operator.
A DID call directed to a calling group will not receive Night Service treatment.
Private network calls will receive Night Service treatment.
Planning Form Instructions 4
In each column on Form 9a, Night Service: Group Assignment, do the following:
1. In the Operator Ext. No. space, write the extension number for the operator
whose calls are being answered (see Form 2a for the extension number).
2. In the Trunk No. column, write the line/trunk number for each outside line
that is a member of the Night Service group (see Form 2c for the line/trunk
number).
3. In the Ext. or Calling Group No. column, write the extension number for
each member of the Night Service group or for a calling group (see Form
2a for the extension number).
4. In the User or Calling Group Name column, write each Night Service group
member’s name or the name of the calling group (see Form 2a for the
group number).