Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Data Communications
Page 5-43Digital Data/Video Stations
5
4. In the Digital Facilities space, enter the method used to access incoming
and outgoing facilities.
a. In the Digital Facilities In space, enter one of the following for
incoming data/video calls:
1. If personal lines are used to receive data/video calls, enter
the line/trunk number for each personal line. For example,
801/802.
2. If Dial Plan Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Dial Plan
Routing.
3. If Tie Line Routing is used to route incoming data/video calls
(PRI and T1 Switched 56 facilities only), enter Tie Line
Routing.
b. In the Digital Facilities Out space, enter one of the following for
outgoing data/video calls:
1. If personal lines are used to place outgoing data/video calls,
enter the line/trunk number for each personal line. For
example, 801/802.
2. If Pool Access is used to place outgoing data/video calls,
enter the pool access number. For example, 890.
3. If Automatic Route Selection (ARS) is used to place outgoing
data/video calls, enter the ARS access code. The ARS
access code factory setting is 9.