Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Control Unit Configuration
Page 2-13Numbering the System
2
Numbering the System 2
This section describes the assignment of numbers to extensions.
NOTE:NOTE:NOTE:
Assigning numbers to calling groups, paging groups, park zones, and
remote access is described later in this book.
The process of numbering extensions consists of the following tasks:
■ Identifying Extension Jacks. Using the placement of modules in the
control unit as a guide (see the Control Unit Diagram on Form 1),
determine the order in which to connect telephones and other equipment to
the control unit. To do this, identify the extension jack types available by
module and then match system components (for example, operator
positions or telephone types) with the jacks that support them.
■ Renumbering. If the system-assigned extension numbers are not
appropriate for the customer’s business, change them. The system offers
two automatic numbering plans (2-digit and 3-digit numbers), as well as the
option of creating a unique numbering plan with extension numbers of 1 to
4 digits. Each of these three plans allows renumbering of all or selected
extensions.
■ Updating Planning Information. Add information to Form 1 and to the
floor plan as appropriate.
This section contains instructions for completing each of these tasks. The
Feature
Reference
provides detailed information about system numbering and the three
numbering plans.
Forms Needed 2
■ Floor plan
■ Equipment List (if available)
■ Form 1, System Planning
■ Form 2a, System Numbering: Extension Jacks
■ Form 2b, System Numbering: Digital Adjuncts