Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Features
Page 4-42System Features
4
Transfer Options 4
This section contains instructions for setting the following Transfer feature options
to allow users to transfer outside or inside calls to another telephone:
■ Transfer Return Interval
■ One-Touch Transfer
■ Transfer Audible
■ Type of Transfer
NOTES:
1. Transfer features, and any other feature that requires more than one SA
button, can be disabled on Single-line telephones by removing all but one
SA button through centralized programming. Refer to Form 4f, Tip/Ring
Equipment.
2. If customers with CTI applications will frequently use the Conference
feature, set the system Transfer Type to Ring and not Voice. This will
minimize the possibility of broadcasting a conference over an unattended
speakerphone.
3. If the DLC operator uses the DSS to transfer calls across a private
network, the operator may want to use manual completion to avoid
transfer without return to busy. If you subscribe to ANI or ICLID and
automatic completion is selected, the ANI and ICLID information will be
sent but calls will not return on busy.
Planning Form Instructions 4
1. Under the Return Time Interval heading in the Transfer Options section of
Form 8a, do
one
of the following:
■ To keep the factory setting, check the 4 rings box.
■ To indicate no return for transferred calls, check the 0 rings box.
■ To change the factory-set number of rings, check the third box and
write the number of rings (1–9) in the space provided.
2. Under the One-Touch Call Handling heading, do
one
of the following:
■ To keep the factory setting, check the One-Touch Transfer box and
do
one
of the following:
— Check the Automatic Completion box to keep the factory-set
automatic completion of transfers.
— Check the Manual Completion box to change the factory
setting to manual completion.
■ To change from One-Touch Transfer to One-Touch Hold, check the
One-Touch Hold box.