Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
NI-1 BRI Review
Page G-2
G
To properly order and program NI-1 BRI service, it may be necessary to
contact the local service provider to determine what services are available
and the type of switching equipment used. See Appendix H, “NI-1 BRI
Provisioning” for detailed information that the local service provider may
require in order to supply the necessary connections.
1. On page 1, fill in the customer name, telephone number, and address.
NOTE:
Reference Number is filled in by SDSC.
2. Fill in the Order Number.
3. Identify the personnel handling the account:
a. Account Executive’s name and telephone number.
b. System Consultant’s name and telephone number.
4. Identify the NI-1 BRI facility vendor by writing the vendor’s name under the
NI-1 BRI Vendor heading, along with the contact person’s name and
telephone number.
5. Under the Installation heading:
a. Write the “Due Date” on which the installation is scheduled to be
complete.
b. Write the date the equipment is scheduled for delivery to the
customer in the Materials-on-Job Date space.
6. Under the Installation Contacts heading, list the names and telephone
numbers of the personnel responsible for the equipment order and its
installation:
a. (Order) Implementor
b. SDSC Manager
c. National Technical Service Center (NTSC) Engineer
d. Data Services Organization (DSO) Manager
7. Under the question about whether the order has been placed:
■ If the order has been placed, check the Yes box and fill in the
expected service turn on date.
■ If the order has not been placed, check the No box.
8. On page 2, enter the type of BRI service to be ordered. Since MERLIN
LEGEND Release 4.0 supports only National ISDN-1 BRI (2B+D) service,
enter
NI-1 BRI in the space provided under the Type of Service heading.
9. Contact the local service provider and determine what type of CO switch
serves your area (such as, Lucent Technologies 5ESS, Northern Telecom
DMS-100, or Siemens SSC EWSD). Enter this information under the Type
of CO Switch heading on page 2 of the form.