Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Control Unit Configuration
Page 2-31Numbering the System
2
Table 2–8. Application Ports
NOTES:
1. Older versions of the 012 T/R module, (apparatus codes 517C13–517F13) if one or
more applications are used, only four tip/ring devices may be assigned to the
module where the application is assigned, regardless of how many jacks are open.
2. The applications in Table 2–8
do not work properly with 012 T/R modules
manufactured for older MERLIN II systems. These applications must be connected
to 016 T/R modules or 012 T/R modules with code 517C13 or higher labeled on the
top of the module. Modules with code 517A13 or 517B13 can be used to connect
single-line telephones only. They do not provide the disconnect signal required by
answering machines and applications. Do not use the 008 OPT module for
applications such as Enhanced Service Center, Messaging 2000, or Intuity AUDIX.
3. When planning for CONVERSANT, refer to the documentation provided with the
application and contact the SDSC (1 888 297-4700 and follow the prompts to reach
the CONVERSANT split) for information on TTRs and ports.
1. No longer orderable.
Application Ports TTRs Telephones
MERLIN LEGEND Mail 2
4
6
1
1
2
NA
Messaging 2000 4
6
8
12
16
2
3
4
5
6
2
1
0
0
0
Intuity AUDIX 4
6
8
10
12
2
3
4
5
6
2
1
0
0
0
Enhanced Service Center (ESC) 12
16
8
8
0
0
CONVERSANT (see Note 3
)
MERLIN MAIL
1
2
4
1
2
3 + 1 for the modem
2 + 1 for the modem
Lucent Technologies Attendant* 1
2
3
4
1
1
2
2
6 + 1 for programming
5 + 1 for programming
4 + 1 for programming
3 + 1 for programming
AUDIX Voice Power* 2
4
6
8
1
2
3
4
6
4
2
0