Filter
Top Products
MERLIN LEGENDCommunications System Release 6.1
System Planning
555-661-112
Issue 1
August 1998
Data Communications
Page 5-33Assigning Lines/Trunks to Data and Video Stations
5
If the system uses ARS, follow the instructions on ARS earlier in this book to
specify routes for outgoing data calls.
To restrict non-data users from dial access to data trunk pools, use the “Pool
Dial-Out Code (Hybrid/PBX Mode Only)” instructions later in this chapter.
Forms Needed 5
■ Form 2c, System Numbering: Line/Trunk Jacks
■ Data Form 1a, Modem Data Station
■ Data Form 1b, ISDN Terminal Adapter Data Station
Planning Form Instructions 5
Record your decisions for each data station on the Hybrid/PBX Mode Button
Diagram of Data Form 1a or 1b.
1. If you want to assign personal lines to the data station, write
Personal Line
and the telephone number (from Form 2c) of the outside line on the
appropriate button. For ISDN terminal adapter data stations, include the
line/trunk number.
2. If you want to assign a pool to the data station, write
Poo l and the pool’s
extension number (from Form 2c) on the appropriate button.
NOTE:NOTE:NOTE:
On modem data stations from which the user does not need to make inside
calls, you can assign only personal lines or pools; when going off-hook, the
user or equipment gets a telephone company line/trunk by Automatic Line
Selection.
Assigning Line Buttons in Key Mode 5
There are two kinds of line buttons you can assign to data stations used to make
and receive data calls:
■ Intercom Ring. Used to make and receive inside data calls only.
■ Outside Line/Trunk. Used to make and receive outside data calls on a
specific outside line/trunk. An outside line/trunk can be assigned to a line
button on one or more data stations or voice extensions. To dedicate an
outside line/trunk for data calls and have the calls automatically answered
at a data station, do not assign the same outside line/trunk to data stations
and to telephones, because modems answer voice calls as data calls.
For digital data stations, the outside line/trunk can be used to make and receive
outside data calls. For an outgoing call, the user dials the line number (801-880)
to select the line/trunk.