Filter
Top Products
Appendix A - Advanced Display Module (ADM)
3A2098H 101
Setup Mode
Setup mode screens are divided into five sections: Sys-
tem setup, Advanced setup, Gateway setup, Fluid Plate
setup, and Swirl setup. While in Run mode, press
to enter Setup mode. Press to navigate
through the Setup mode screens.
If the setup screens are password protected, a pass-
word entry screen will appear after pressing . The
password is defined in the Advanced setup screen. If
the password is set to 0000, the password is disabled.
Advanced Setup Screens
There are four Advanced setup screens, which enable
users to set units, adjust values, set formats, define
USB settings, and view software information for each
component. Press to scroll through the
Advanced setup screens. Once in the desired Advanced
setup screen, press to access the fields to make
changes. Press to exit edit mode.
NOTE: Users must be out of edit mode to scroll through
the Advanced setup screens.
Advanced Setup Screen 1
This screen enables users to set the language, date for-
mat, current date and time, password, and number of
minutes before the screen saver comes on. The time
does not automatically update for daylight savings time.
Advanced Setup Screen 2
This screen enables users to set the units of measure
for maintenance volume, maintenance mass, pressure,
and flow rate.
Advanced Setup Screen 3
This screen enables users to setup USB-related set-
tings. The Disable USB Log Errors option disables
recording events when the logs are at least 90% full.
Advanced Setup Screen 4
This screen displays the software part number and ver-
sion for the ADM, USB configuration, Gateway module,
and fluid plates.