Filter
Top Products
Operation
50 3A2098H
Typical Job Cycle Chart
NOTE: Swirl can be turned on at any point inside of or
outside of a job. Allow time for the swirl to reach desired
RPM. If possible, verify Swirl speed through the automa-
tion interface prior to opening the dispense valve.
Dispenser (Fluid Plate) No Alarm
Dispenser (Fluid Plate) No Error
Dispenser (Fluid Plate) In Process
Volume OK
Style Bits
Style Strobe
Automation Outputs (PCF Inputs)
Dispense Valve X On
Dispense Complete
Regulator Active (Precharge = 0)
PCF State
Dispense Valve X Open
Dispense Ready
Automation Inputs (PCF Outputs)
First Job
Second Job