Filter
Top Products
Overview
20 3A2098H
Key Tokens
The ADM and FCM must each have a key token
installed in order to operate. If the incorrect key token is
installed, the module will not operate. The DGM does
not require a key token.
NOTE: There is one FCM located on each fluid plate.
If a new ADM or FCM is installed, follow the instructions
on page 77 to upgrade the software in the new module
and to install the key token from the old module in the
new module.
The following is a list of key token part numbers. If you
lose your key token be sure to order the correct item to
ensure proper system operation.
NOTE: The key tokens for the ADM and FCM look alike
but only work in one module or the other. If the key
tokens for the ADM and FCM become mixed, locate the
part number on each token then refer to the following
table to determine which module each token applies to.
F
IG
. 11
Part Description
16M100 FCM Key Token, 2 styles, Flow Meter
16M101 FCM Key Token, 2 styles, No Flow Meter
16M102 FCM Key Token, 16 styles, Flow Meter
16M103 FCM Key Token, 16 styles, No Flow Meter
16M104 FCM Key Token, 256 styles, Flow Meter
16M105 FCM Key Token, 256 styles, No Flow
Meter
16M217 ADM Key Token, Standard PCF
FCMADM