Filter
Top Products
Errors
66 3A2098H
Errors
View Errors
When an error occurs, an error pop-up is displayed that
takes up the entire screen until the error is acknowl-
edged by pressing . Errors can also be acknowl-
edged over the gateway. Active errors are displayed in
the menu bar.
The previous 200 errors are displayed on the error
report screens. See Run Mode, page 110, for instruc-
tions on navigating to and through the error report
screens.
There are three levels of errors: alarms, deviations, and
advisories. Alarms cause the system to shut down.
Deviations and advisories do not shut down the system.
NOTE:
• Alarms set the dispenser (fluid plate) ready signal
LOW.
• Advisories and deviations do not set the dispenser
(fluid plate) ready signal LOW.
Diagnose Errors
See Event and Error Codes and Troubleshooting on
page 67 for error codes, possible causes, and solutions.
F
IG
. 40: Error Pop-Up
Error