Filter
Top Products
Maintenance
78 3A2098H
5. After the red indicator light shuts off, turn off power
to the system.
6. Remove token.
7. Replace access cover.
Upgrade Gateway Module
Fieldbus Map
NOTE: The fieldbus connection is temporarily disabled
during the use of a map token. The following instructions
apply to all Gateway modules.
1. Perform Upgrade Gateway Module Software.
Software must be upgraded before upgrading the
fieldbus map.
2. Remove the access cover.
3. Insert and press map token firmly into slot.
NOTE: There is no preferred orientation of the token.
4. Press and hold the push button for three seconds
and then release. The red indicator light (CK) will
flash twice, pause, and then once after the data
map is uploaded.
5. Remove map token (CC) when software has suc-
cessfully uploaded.
6. Replace access cover.
F
IG
. 45: Remove Access Cover
Access
Cover
TI12319A
F
IG
. 46: Insert Token
Token
TI12320A
Push Button
CK