Filter
Top Products
Appendix A - Advanced Display Module (ADM)
108 3A2098H
Fluid Plate x, Screen 7 (Maintenance Advisory
Limits)
This screen enables users to set volume (or hours) limit
that will trigger a maintenance advisory for the air sup-
ply, voltage to pressure (V/P) transducer, fluid regulator,
flow meter, and all four valves.
NOTE: Hours is shown instead of Volume for fluid plates
without a flow meter.
The Volume (or Hours) column displays the current
totalizer value. If this value exceeds the set limit, the
value will turn red and a maintenance advisory is issued.
See Fluid Plate x, Screen 3 (Maintenance Totalizers),
page 113, for more information about maintenance total-
izers.
Fluid Plate x, Screen 8 (Style)
This screen enables users to set up to 256 styles,
depending on system configuration. Press to
access the style setup fields. Enter the style number in
the Style field, the target volume in the Volume field, and
the tolerance percentage in the Tolerance field.
NOTE: The number of possible styles is dependent on
the model type.
To enter the style name, press while in the Style
Name field. See Keyboard Screen, page 109, for
instructions on using the keyboard screen to enter the
style name.