Filter
Top Products
Chapter 4 Linear Servomotor Specifications
4–2
4-1 Type configuration
The type indication for the linear servomotor differs for the primary side and secondary side.
(1) Primary side
LM – N
P
1)
2)
–
3)
4)
–
5)
(2) Secondary side
LM – N
S
1)
0
–
2)
–
3)
CAUTION
∗ The combination of the primary side and secondary side is indicated with the
type symbol 1).
Select a model that has the same type symbol 1) for the primary side and
secondary side.
5) Mitsubishi control No.
The Mitsubishi control No. is indicated
with two alphanumeric digits.
3) Rated thrust
The rated thrust is indicated with the
two digits for the 1000th place and
100th place.
Example) 500[N]→05 3,000[N]→30
1) Width dimensions
(nominal dimensions)
2 130 [mm]
4 210 [mm]
1) Length dimensions
(nominal dimensions)
S 290 [mm]
M 530 [mm]
L 770 [mm]
G 1,010 [mm]
4) Max. speed
M 120 [m/s]
5) Mitsubishi control No.
The Mitsubishi control No. is indicated
with two alphanumeric digits.
2) Length dimensions
(nominal dimensions)
The secondary side length dimensions
are indicated as a [mm] unit with three
digits.
Example) 360[mm]→360
1) Width dimensions
(nominal dimensions)
2 120 [mm]
4 210 [mm]