Filter
Top Products
Chapter 9 Setup
9–5
(5) Motor type (SV025: MTYP)
Set the combination with SV017: SPEC spm in SV025: MTYP mtyp.
Name Abbrev. Details
Setting range
(unit)
SV017 SPEC
Servo specifications
HEX setting
Name Abbrev. Details
Setting range
(unit)
SV025 MTYP
Motor/detector type
HEX setting
1) Standard linear motor
SV017: SPEC = 6xxx
Set the Nos. given in the following table in SV025: mtyp (bit 0 to bit 7) according to the linear
motor (LM-) being used.
For self-cooling, "NPM" (excluding the hyphen) is displayed on the CNC screen. For
oil-cooling, the following type "NPMc" (excluding the hyphen) with a "c" added to the
end is displayed.
Cooling
method
Self-cooling Oil-cooling
Motor
series
Standard Standard
No.
0x 1x 2x 3x 4x 5x 6x 7x 8x 9x Ax Bx Cx Dx Ex Fx
x0
NP2S 05M NP2S 05M
x1
NP2M 15M NP2M 15M
x2
NP2L 15M NP2L 15M
x3
x4
NP4S 10M NP4S 10M
x5
NP4M 20M NP4M 20M
x6
NP4L 30M NP4L 30M
x7
NP4G 40M NP4G 40M
x8
NP6A 25F
x9
xA
xB
xC
xD
xE
xF
F E D C B A 9 8 7 6 5 4 3 2 1 0
spm drvall drvup mpt3 mp abs vmh vdir fdir seqh dfbx vdir2
bit Name Meaning when "0" is set Meaning when "1" is set
C
D
E
F
spm Standard linear motor : 6
Special linear motor : 7
F E D C B A 9 8 7 6 5 4 3 2 1 0
Pen ent mtyp