Filter
Top Products
110
V/F pattern
NOTE
Load pattern selection does not function under Advanced magnetic flux vector control and General-purpose
magnetic flux vector control.
Parameters referred to
Pr. 0, Pr. 46 (Torque boost) Refer to page 94
Pr. 3 Base frequency
Refer to page 107
General-purpose magnetic flux vector control Refer to page 98
Advanced magnetic flux vector control Refer to page 95
REMARKS
When torque is continuously regenerated as vertical lift load, it is effective to set the rated voltage in Pr. 19 Base frequency voltage
to prevent trip due to current at regeneration.
In addition, when the RT signal is ON, the other second functions are also valid.