Filter
Top Products
48
Wiring
4.3.4 Connecting the FL-net dedicated cable
Connect the FL-net dedicated cable to the FL remote communication connector.
NOTE
y Do not connect the FL-net dedicated cable to the terminal reserved for manufacturer settings.
CAUTION
Do not connect a parameter unit (FR-PU07, etc.) to the FL remote communication connector. Doing so may
damage the inverter.
Take caution not to subject the cables to stress.
After wiring, wire offcuts must not be left in the inverter. Wire offcuts can cause an alarm, failure or
malfunction.
Terminal reserved for manufacturer settings
FL remote communication connector