Filter
Top Products
126
Selection and protection of a motor
(2) Use two motors (Pr. 450)
Set Pr. 450 Second applied motor to use two different motors with one inverter.
When "9999" (initial value) is set, no function is selected.
When a value other than 9999 is set in Pr. 450, the second motor is valid when the RT signal turns ON.
REMARKS
The RT signal acts as the second function selection signal and makes the other second functions valid. (Refer to page 143)
CAUTION
Make sure to set this parameter correctly according to the motor used.
Incorrect setting may cause the motor to overheat and burn.
Parameters referred to
Pr. 0 Torque boost Refer to page 94
Pr. 12 DC injection brake operation voltage
Refer to page 135
Pr. 80 Motor capacity, Pr. 81 Number of motor poles Refer to page 127
Pr. 82 to Pr. 84, Pr. 90 to Pr. 94 (motor constants), Pr. 96 Auto tuning setting/status
Refer to page 127
Pr. 800 Control method selection Refer to page 93