Filter
Top Products
APPENDIX 7 CABLE MANUFACTURING DRAWINGS
Appendix 7.9 FCUA-R000 Cable Manufacturing Drawing
I - 94
Appendix 7.9 FCUA-R000 Cable Manufacturing Drawing
Application :
Control unit – servo drive unit connection
Servo drive unit – servo drive unit connection
Control unit - communication terminal connection, etc.
Option (Compatible connector set)
FCUA-CS000
List of parts used
1
2
3
R000
1
2
R000
Note (3)
Assembly drawing
No. Part name/type Maker Q'ty
1
Connector
10120-6000EL
Sumitomo 3M 2
2
Connector case
10320-3210-000
Sumitomo 3M 2
3
Wire material
UL20276
AWG28 × 10P
Note (1) (1)
(Note)
This cable is the same as SH21 cable.
Maximum cable length: 30m
1
11
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
Case GND plate
Case GND plate
1
11
2
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
Connection diagram
Manufacturing precautions
(1) The wire material shall be a shielded, 10-pair stranded cable equivalent to UL20276 Standards
AWG28 (0.08mm
2
).
(2) The parts used shall be Mitsubishi recommended parts. Equivalent parts may be used providing
they are compatible with the specifications.
(3) Attach the nameplate (with protective cover stamped with the cable name) in the position
designated in the assembly drawing.
(4) Fold the wire material shield over the sheath, and wrap copper foil tape over it. Clamp with the
connector case frame.
(5) The part 1 connector and part 2 connector case are crimp type parts. If soldered types are
preferred, use the 10120-3000VE connector and 10320-52F0-008 connector case (both
Sumitomo 3M).