Lucent Technologies 5 Marine Radio User Manual


 
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Features and Applications
Page 4-46Features
4
SECURITYlALERT:
!
The MERLIN LEGEND Communications System ships with ARS activated
with all extensions set to Facility Restriction Level 3, allowing all
international calling. To prevent toll fraud, ARS Facility Restriction Levels
(FRLs) should be established using:
FRL 0 for restriction to inside calls only
FRL 2 for restriction to local calls only
FRL 3 for restriction to domestic long distance (excluding area code
809 for the Dominican Republic as this is part of the North American
Numbering Plan, unless 809 is required)
FRL 4 for international calling
Each extension should be assigned the appropriate FRL to match its
calling requirement. All voice mail port extensions and barrier
codes not used for outcalling should be assigned to FRL 0 (the
default setting in Release 3.1 and later).
Authorization Codes 4
Authorization codes are passwords that allow users to apply the calling
restrictions of their own extensions when they want to make a call using a more
restricted extension.
Using system programming, you can assign one authorization code of 2 to 11
characters for each extension. While each authorization code must be unique,
more than one user can use an authorization code simultaneously, for example, to
set up a conference call. For optimal security, you should use the longest possible
barrier codes (11 characters).
The following issues should be considered when you assign or modify
authorization codes:
The assignment of authorization codes depends on your company’s culture
and how system calling restrictions are assigned. For example, you may
choose to assign authorization codes only to top-level executives who have
a high level of calling privileges or to users who move around the company
throughout the day rather than sitting at their own desks.
Or, if there are several phones with little or no outside calling privileges, for
example, in common areas used by the public, you may choose to assign
authorization codes to all users so they can use those phones if they need
to.
Authorization codes interact with other system features. For example, if the
user’s own extension is assigned Forced Account Code Entry, the user
must enter an account code after entering the authorization code.