Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-36Using Reports
6
NOTES:
1. If you select the
All option, the reports take several minutes to print.
You may want to schedule use of the printer during off-peak hours.
2. If you select a report for which there is no information, the report
header still prints.
3. Print reports if you cannot back up your system programming
information.
4. If your system must handle more than 100 calls per hour, do not print
reports during regular hours.
5. If you are printing from the console, your printer must be connected to
the SMDR port. If you are programming on a PC with SPM, you have
the following choices:
■ Print reports on the SMDR printer (if available).
■ Print reports on the PC printer.
■ Save reports (on hard disk or floppy).
■ View reports (browse).
To print system programming reports, use one of the following procedures:
Console Procedures To print trunk information:
More
→Print→Trunk Info→Select trunk type→Exit
To print extension information:
More
→Print→More→Ext Info→Dial ext.
no.
→Enter→Exit
To print all other reports:
More
→Print→Select report→Exit
PC Procedures To print trunk information:
→ → →Select trunk type→
To print extension information:
→ → → →Type ext. no.→ →
To print all other reports:
→ →Select report→
To save report on disk:
→ →Select report→ →select GOTO FLOPPY
from below console simulation screen
→
To view report:
+