Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
System Components
Page 3-22Telephones
3
replaces an MLX-10 or MLX-10D telephone, all line and feature
buttons must
first
be removed from the extension by centralized
telephone programming, so that “phantom buttons” do not exist for the
new telephone. Programming instructions come with the equipment.
MLX-5 telephones can be wall-mounted.
Direct Station Selector 3
The Direct Station Selector (DSS), shown in Figure 3–10, is an adjunct that you
can connect to an MLX-20L or an MLX-28D telephone programmed as an
operator console (it cannot connect to any other telephone). DSSs enhance the
capabilities of both DLCs and QCCs and, when connected to an MLX-20L
telephone, help with programming. The DSS has 50 multifunction buttons, all of
which have lights.
The system operator can use DSS buttons for one-touch dialing and Transfer.
Buttons can be programmed with the following numbers:
■ Extension numbers
■ Line/trunk numbers
■ Pool dial-out codes (Hybrid/PBX only)
■ Calling group extension numbers
■ Paging group extension numbers
■ Park zone access codes
■ Automatic Route Selection (ARS) access codes
■ Remote Access dial code
■ Listed Directory Number (the extension for the QCC queue)