Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-22Programming from a PC with SPM
6
To access SPM through a local or remote modem connection, follow the steps
below. For more information about the procedure format, see ‘‘
Using the
Programming Procedures’’ on page 6-3.
Console/Display Instructions Additional Information
Set up the appropriate physical connections between the PC and the control
unit as described in Chapter 2 of
System Programming.
Type
spm
and press to display the SPM Welcome screen shown below.
Press any key to display a blank screen on which you can enter modem com-
mands. (You may have to press the key several times.)
Make a data connection to the modem of the control unit.
See Chapter 2, “Programming with SPM,” in
System Programming
. When the
connection is made, the password prompt appears, as shown in Step 5
.
Type the remote access password to display the SPM Main Menu shown in
Step 6
.
The password does not display when you type it.
To reach the System Programming menu, select System Programming by
pressing .
Welcome to SPM
X.XX
= current version of SPM
The MERLIN LEGEND
System Programming
& Maintenance Utility
Please press any key
to continue
Version X.XX
Enter Password:
SPM Main Menu
Menu: Select Function
Sys Prog Maintenance
Backup Restore
Boards Pass-Thru
Print Opts Password
Monitor Language