Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-69Revising Allowed Lists
6
NOTE:
To assign an extension to a new calling group, you must remove it from its
old group before programming the new assignment.
Valid Entries
Extension numbers
Task List: Changing Calling Group Assignments 6
Obtain Form 7d, Group Calling.
If necessary, read “Group Calling” in the
Feature Reference
for detailed
information about this feature.
Plan changes using the planning guidelines above; record the new values
on Form 7d.
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for “Group Calling
Member Assignments” in the “Optional Group Features” section of
System
Programming
, Chapter 3, or the summary programming instructions below.
When you have finished, file Form 7d with the rest of the planning forms.
Programming Instructions 6
Revising Allowed Lists 6
An Allowed List provides some flexibility for extensions with calling restrictions by
allowing specified extensions to dial certain numbers (for example, 911),
regardless of the extension’s calling restrictions. Use this procedure to modify an
Allowed List of telephone numbers that can be dialed.
NOTE:
A Disallowed List takes precedence over an Allowed List.
Console Procedure
Extensions→More→Grp Calling→Members→Dial
calling group ext. no.
→Enter→Dial ext. no.→ Enter→
Exit→Exit→Exit
PC Procedure → → → →Type calling group ext. no.→
→Type ext. no.→ → → →