Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-76Changing Group Coverage Assignments
6
Task List: Assigning
Disallowed Lists to Extensions 6
Obtain Form 6f, Disallowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read “Allowed/Disallowed Lists” in the
Feature Reference
for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for “Assign Disallowed
Lists to Telephones” in the “System Features” section of
System
Programming
, Chapter 3, or the summary programming instructions below.
When you have finished, file the form(s) with the rest of the planning forms.
SECURITYlALERT:
!
In Release 3.1 and later systems, Disallowed List number 7 is
automatically assigned to voice messaging system ports. To help
guard against toll fraud, assign this list to other extensions. For more
information, see the section above, “Changing Disallowed Lists.”
Programming Instructions 6
Changing Group
Coverage Assignments 6
Use this procedure to assign or remove an extension from a coverage group.
NOTE:
In Release 4.1 and later systems, you can change, on an
extension-by-extension basis, the number of rings at a sender’s extension
before a call is sent to Group Coverage receivers. For programming
information, see Chapter 3, “Common Administrative Procedures,” in
System Programming
and ‘‘Changing Coverage Delay Options’’ on page
6-50
.
Console Procedure Tables→DisallowTo→Dial list no.→Enter→Dial ext.
no.
→Enter→Exit→Exit
PC Procedure → →Type list no.→ →Type ext. no.→ →
→