Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-25Centralized Telephone Programming
6
next section. For detailed information about the List Feature option, see
Chapter 5 in
System Programming.
Guidelines for Programming Extensions 6
Review the items below before you begin to program extensions.
■ Refer to Appendix C in
System Programming
to locate the code for the
feature that you want to program, or use the List Feature menu (which
includes the
Find Feature option) by selecting ListFeature from the
screen that appears when you are programming a feature (see Step 6
in
the procedure that begins on page 6-26
). For more information about using
the List Feature menu, see Chapter 5 in
System Programming.
■ If you enter a feature code incorrectly or enter a feature code that is not
appropriate for the selected button, you may hear a beep or see the
message
Programming Error as the green light next to the button flashes.
Press the button again and repeat the procedure.
■ If you program the wrong feature on a button, follow the steps below:
1. Press the button.
2. Select
Delete (press on the PC).
3. Press the button again.
■ If you press a line button that is not active, the screen shown below
appears. Press Home to return to the Home screen.
■ You can use the Extension Information (Ext Info) report option on the
Print menu (accessed from the System Programming menu) to print all of
the programmed features for a specific extension.
Blank
Press HOME to Exit
Page 1
Page 2
Sys Program ListFeature