Filter
Top Products
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-72Revising Disallowed Lists
6
Valid Entries
0 to 7
Task List: Assigning Allowed Lists to Telephones6
Obtain Form 6e, Allowed Lists and, as appropriate, the form(s) for
individual telephones: Forms 4b, 4d, 4e, 4f, 5a, 5b, or 5c.
If necessary, read “Allowed/Disallowed Lists” in the
Feature Reference
for
detailed information about this feature.
Plan changes using the planning guidelines above; record the new values
on the form(s).
Open the System Programming menu from the console or a PC with SPM.
Program the change(s), following the instructions for “Assign Allowed Lists
to Telephones” in the “System Features” section of
System Programming
,
Chapter 3, or the summary programming instructions below.
When you have finished, file the forms with the rest of the planning forms.
Programming Instructions 6
Revising Disallowed Lists 6
Use this procedure to establish Disallowed Lists that contain telephone numbers
than cannot be dialed from specified telephones (including unrestricted
telephones). A Disallowed List takes precedence over an Allowed List.
Planning Guidelines 6
Changing Disallowed Lists may affect other features, including Auto Dial,
Automatic Route Selection (ARS), Conference, Forward and Follow Me, personal
lines, Remote Access, and Toll Type. For more information, see the
Feature
Reference
.
When Disallowed Lists are used in conjunction with Remote Access to restrict
calls made through the system from remote locations, the Disallowed Lists can be
assigned to either a specific barrier code (password) or to specific types of remote
access trunks (for example, all tie/DID trunks).
In Release 3.1 and later systems, star codes may be included in Allowed and
Disallowed Lists. In these systems, dialed star codes are ignored by ARS for
Console Procedure
Tables→AllowTo→Dial list no.→Enter→Dial ext.
no.
→Enter→Exit→Exit
PC Procedure → →Type list no.→ →Type ext. no.→ →
→