Filter
Top Products
BIOS Intel® Server Board SE7501WV2 TPS
Revision 1.0
Intel reference number C25653-001
100
Table 34. Primary Master and Slave Adapters Sub-menu Selections
Feature Option Description
Type None
Auto
Auto allows the system to attempt auto-detection of the drive type.
None informs the system to ignore this drive.
LBA Mode Control
Disabled
Enabled
Disabled by default if no devices are detected, otherwise the setting is auto
detected
This field is informational only.
Multi-Sector
Transfer
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Displays the number of sectors per block for multiple sector transfers.
This field is informational only.
This option is viewable only if an IDE HDD is detected.
PIO Mode
Standard
1
2
3
3 / DMA 1
4
4 / DMA 2
Displays the method for moving data to/from the drive.
This field is informational only.
Ultra DMA 2
4
Displays the method for moving data to/from the drive.
This field is informational only.
Table 35. Processor Settings Sub-menu
Feature Option Description
Processor Type Information Only Displays the type of processor(s) installed
Processor POST Speed Information Only Displays the measured processor speed
Processor Retest
Disabled
Enabled
If enabled, BIOS will clear historical processor status and retest
all processors on the next boot.
Hyper-Threading Technology Disabled
Enabled
Controls the state of Hyper-Threading Technology in the
processors.
Processor 1 CPUID
CPU ID
Non Installed
Disabled
Reports CPUID for Processor 1, if present. If empty, reports Not
Installed. If disabled by the BMC, reports Disabled.
Processor 1 L2 Cache Size N/A Reports L2 Cache Size for Processor 1.
Processor 2 CPUID CPU ID
Non Installed
Disabled
Reports CPUID of Processor 2 , if present. If empty, reports Not
Installed. If disabled by the BMC, reports Disabled.
Processor 2 L2 Cache Size N/A Reports L2 Cache Size for Processor 2.
6.20.2.5 Advanced Menu Selections
The following tables describe the menu options and associated sub-menus available on the
Advanced Menu.