Intel SE7501WV2 Life Jacket User Manual


 
Intel® Server Board SE7501WV2 TPS Regulatory and Integration Information
Revision 1.0
Intel reference number C25653-001
165
11.2 Electromagnetic Compatibility Notices
11.2.1 Europe (CE Declaration of Conformity)
This product has been tested in accordance too, and complies with the Low Voltage Directive
(73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark
to illustrate its compliance.
11.2.2 Australian Communications Authority (ACA) (C-Tick Declaration of
Conformity)
This product has been tested to AS/NZS 3548, and complies with ACA emission requirements.
The product has been marked with the C-Tick Mark to illustrate its compliance.
11.2.3 Ministry of Economic Development (New Zealand) Declaration of
Conformity
This product has been tested to AS/NZS 3548, and complies with New Zealand’s Ministry of
Economic Development emission requirements.
11.2.4 BSMI (Taiwan)
The BSMI Certification number 3902I904 is silk screened on the component side of the server
board, and the following BSMI EMC warning is located on the solder side of the server board.
11.3 Replacing the Back up Battery
The lithium battery on the server board powers the real time clock (RTC) in the absence of
power. When the battery starts to weaken, it loses voltage, and the server settings stored in
CMOS RAM in the RTC (for example, the date and time) may be wrong. Contact your customer
service representative or dealer for a list of approved devices.
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the equipment manufacturer. Discard used batteries according to
manufacturer’s instructions.