Filter
Top Products
Intel® Server Board SE7501WV2 TPS General Specifications
Revision 1.0
Intel reference number C25653-001
159
10. General Specifications
10.1 Absolute Maximum Ratings
Operating an SE7501WV2 baseboard at conditions beyond those shown in the following table
may cause permanent damage to the system. The table is provided for stress testing purposes
only. Exposure to absolute maximum rating conditions for extended periods may affect system
reliability.
Table 95. Absolute Maximum Ratings
Operating Temperature 5 degrees C to 50 degrees C
1
Storage Temperature -55 degrees C to +150 degrees C
Voltage on any signal with respect to ground -0.3 V to Vdd + 0.3V
2
3.3 V Supply Voltage with Respect to ground -0.3 V to 3.63 V
5 V Supply Voltage with Respect to ground -0.3 V to 5.5 V
Notes:
1. Chassis design must provide proper airflow to avoid exceeding processor maximum case
temperature.
2. VDD means supply voltage for the device
10.2 Power Information
10.2.1 SE7501WV2 Server Board Power Budget
The following table shows the power consumed on each supply line for the SE7501WV2 server
board that is configured with two processors (Flexible Motherboard Specification @ 75%
usage). This configuration includes six DIMMs stacked burst, 70% max. The numbers provided
in the table should be used for reference purposes only. Different hardware configurations will
produce different numbers. The numbers in the table reflect a common usage model operating
at higher than average stress levels.
Table 96. Intel
®
Server Board SE7501WV2/SR2300/SR1300 Power Budget
SR2300 Chassis Device(s) 3.3V 5.V 12.V -12.V 5.VSB 3.3VSB
Processors 13.A
Memory DIMMs 5.9A
Server Board 6.6A 2.6A .5A .A 1.5A
Fans 4.9A
Keyboard/Mouse .4A
PCI Slots (standby on full height slots only) 6.4A 8.4A .5A .5A .4A
Peripherals 6.2A 7.5A .1A
Total Current 13.A 17.6A 32.3A .5A 1.5A .5A Total Power
Total Power 42.9W 88.W 387.6W -6.W 7.5W 1.7W 500.5W