Filter
Top Products
241
Setting the parameter unit and operation panel
4
PARAMETERS
4.22.5 Buzzer control (Pr. 990)
The above parameter can be set when Pr. 160 Extended function display selection = "0". (Refer to page 162)
The above parameter allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write
selection.
4.22.6 PU contrast adjustment (Pr. 991)
The above parameter is displayed as simple mode parameter only when the parameter unit FR-PU04/FR-PU07 is connected.
The above parameter allow its setting to be changed during operation in any operation mode even if "0" (initial value) is set in Pr. 77 Parameter write
selection.
You can make the buzzer "beep" when you press the key of the parameter unit (FR-PU04/FR-PU07).
Parameter
Number
Name Initial Value Setting Range Description
990 PU buzzer control
1
0 Without buzzer
1 With buzzer
Contrast adjustment of the LCD of the parameter unit (FR-PU04/FR-PU07) can be performed.
Decreasing the setting value makes contrast light.
Parameter
Number
Name Initial Value Setting Range Description
991 PU contrast adjustment
58 0 to 63
0: Light
↓
63: Dark