Filter
Top Products
3-31190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
NEXRAD Viewing Range
The NEXRAD Viewing Range option selects whether the NEXRAD weather
products is shown on the MFD. NEXRAD weather products will be shown at
and below the selected map range. When Off is selected, NEXRAD weather will
not be shown. Map ranges above the selected value will not show the NEXRAD
weather products. In the example below where 200 NM is selected, the NEXRAD
weather products will be shown at map ranges of 200 NM and lower.
Figure 3-45 NEXRAD Viewing Range Selection
1) While viewing the Navigation Map Setup page and the Weather Group active,
turn the large MFD knob to highlight the “NEXRAD Viewing Range” option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT
to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.