Filter
Top Products
3-78
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
3.5.1.1 Active Flight Plan Detail
The active flight plan is shown on the first page of the Flight Plan page group.
Further information may be available for each waypoint as shown by the INFO
or WX soft keys. The WX soft key will only appear if a data link receiver is
installed and there is a Weather subscription.
1) Press the MFD knob and then use the large and small MFD knobs to highlight
waypoints in the flight plan.
2) Press the INFO soft key, if available, to view information about the highlighted
waypoint.
3) Press the WX soft key, if available, to view XM weather information about the
highlighted waypoint.
4) Press the small MFD knob to return to the Active Flight Plan page.
3.5.1.2 Active Flight Plan Options
The Active Flight Plan page provides information for the flight plan currently
in use for navigation.
To change data fields on the Active Flight Plan Page:
1) While viewing the Active Flight Plan Page of the FPL page group, press MENU
to display the Active Flight Plan Page Options window.
2. Turn the large MFD knob to highlight “Change Fields?” and then press ENT.
Figure 3-109 Active Flight Plan Page Menu Option Selection
3) Turn the large MFD knob to highlight the field you wish to change.
Figure 3-110 Active Flight Plan Page Menu Change Fields Option Selection