Filter
Top Products
3-52
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
4) With the Mode value highlighted, turn the small MFD knob to select Auto or
Manual and then press ENT
.
Figure 3-69 Aux Mode Display Brightness Mode Selection
3.4.1.2 Airspeed Reference Marks
The Best Glide, Vr, Vx, and Vy airspeed reference marks for the PFD are
adjusted with this function. A marker will appear on the PFD Airspeed tape at
the selected speed when the value is set to “On.” Default reference airspeeds are
set during installation. When power is cycled, the values you set will be reset.
NOTE:
When power is cycled, the Airspeed Reference values are reset.
During preflight, the Airspeed Reference values should be checked and
set appropriately for the current aircraft configuration and performance.
Figure 3-70 Airspeed References shown on PFD when activated