Garmin G600 Marine GPS System User Manual


 
3-84
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Runway Information Selection
Information is provided for each runway showing the following detail: runway
number, runway length, surface type, and the frequency for Pilot-Controlled
Lighting (PCL).
Runway Number
Runway Surface
Arrow Indicates
More Runways
Runway Length
& Width
Pilot-Controlled
Lighting Frequency
Figure 3-119 Waypoint Runway Information
1) While viewing the Waypoint Information page of the FPL page group, press the
RWY/FREQ soft key to view information about the waypoint and press the
small MFD knob to activate the cursor.
2) Use the large MFD knob to highlight the Runway and use the small MFD knob
to display the available runways.
3) Press the small MFD knob to cancel editing.
Facility Frequency Selection
The Frequency window at the bottom of the Waypoint Information page
shows the frequencies available for the selected waypoint. A scroll bar is shown
on the right side of the Frequency window if more frequencies are available.
Figure 3-120 Waypoint Frequency Information
1) While viewing the Waypoint Information page of the FPL page group, press the
RWY/FREQ soft key to view information about the waypoint and then press
the small MFD knob to activate the cursor.
2) Turn the small MFD knob to scroll through the available frequencies.
3) Press the small MFD knob to exit.