Filter
Top Products
3-67190-00601-02 Rev. E
Garmin G600 Pilot’s Guide
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary Appendix A
Appendix B
Index
1) Turn the large MFD knob to reach the Aux page group. Turn the small MFD
knob to reach the Position Reporting page.
2) Press the small MFD knob to select the Report Type.
3) Turn the small MFD knob to highlight Standard and then press the ENT key.
Figure 3-90 Select Standard Reporting
4) The Position Reporting Period type will now be selected. Turn the small MFD
knob to highlight "Off" or "Automatic" and then press the ENT key. The
Position Reporting Period interval will now be selected.
5) Turn the small MFD knob to select the reporting frequency.
Figure 3-91 Select Standard Reporting Period Frequency
6) Press the small MFD knob to exit editing.
7) With the Standard Reporting Type, the reporting period may be manually
overridden by pressing the SEND soft key to send data.
SEND Soft Key Label
SEND Soft Key
Figure 3-92 Press SEND to Override the Reporting Period