Filter
Top Products
3-70
Garmin G600 Pilot’s Guide
190-00601-02 Rev. E
Foreword
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazard
Avoidance
Sec 5
Additional
Features
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
GlossaryAppendix A
Appendix B
Index
Call Suppression controls calling when use of the Iridium phone system is
allowed.
1) Turn the large MFD knob to reach the Aux page group. Turn the small MFD
knob to reach the Iridium Phone page.
2) Press the small MFD knob to select the Call Suppression type.
Status Description
Off Call Suppression is turned off. Calls may be transmitted and
received through the Iridium phone.
On Call Suppression is turned on. The incoming call pop-up will not
be shown. The call may still be answered on the phone page.
Outgoing calls are not affected.
On During APR/
MAPR/TERM
Call Suppression is turned on during Approach, Missed Approach,
and Terminal operations. The incoming call pop-up will not
be shown. The call may still be answered on the phone page.
Outgoing calls are not affected.
Table 3-7 Call Suppression
3) Turn the small MFD knob to highlight the desired selection.
Figure 3-95 Select Call Suppression
4) Press the ENT key. Press the small MFD knob again to cancel the selection
cursor.